Djupbrunnspump Grundfos SP215-1, 18,5kW 215m³/h, 23m 3x400V 50Hz 
Deep well pump Grundfos SP215-1, 18.5kW 215m³/h, 23m 3x400V 50Hz
- Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally.
- All steel components are made of stainless steel, EN 1.4301 (AISI 304), which ensures good corrosion resistance.
- This pump is approved for drinking water.
- Pump is equipped with an 18.5 kW MS6000 motor with sand protection, mechanical shaft seal, water lubricated shaft bearings and a volume compensating diaphragm.
- The motor is a closed-type submersible motor with good mechanical stability and high efficiency.
- Suitable for temperatures up to 40°C.
- The motor is equipped with a Grundfos Tempcon temperature sensor which, through communication via the power cable together with a control panel MP204, enables monitoring of the temperature.
- The motor is intended for direct start (DOL).
Additional product
information The pump is suitable for applications similar to the following:
information The pump is suitable for applications similar to the following:
- Raw water supply
- Irrigation
- Groundwater lowering
- Pressure increase
- Fountain applications
| Liquid | |
| Pump Liquid | Water |
| Max. liquid temperature | 40°C |
| Max liquid t at 0.15 m/s | 40°C |
| Liquid temp | 20°C |
| Density | 998.2 kg/m³ |
| Technical data | |
| Speed |
2900 rpm |
| Resulting flow | 215 m³ /h |
| Resulting lift height for the pump | 23 m |
| Reduce. impeller | No |
| Shaft seal for engine | CER/CARNBR |
| Read on the nameplate | CE, GOST2 |
| Curve tolerance | ISO9906:2012 3B |
| Pump type | SP 215 |
| Step | 1 |
| Model | C |
| Valve | Yes |
| Engine version | T40 |
| Material | |
| Pump | Stainless steel EN 1.4301 AISI 304 |
| Impeller | Stainless steel EN 1.4301 AISI 304 |
| Engine | Stainless steel DIN W.-No. 1.4301 AISI 304 |
| Installation | |
| Print page | RP6 |
| Engine diameter | 6" |
| Electrical data | |
| Engine type | MS6000 |
| Application. engine | Grundfos |
| Power consumption - P2 | 18.5 kW |
| Power requirement (P2) for pump | 18.5 kW |
| Mains frequency | 50 Hz |
| Rated voltage |
3 x |
| Nominal current |
42.0-41.0- |
| Starting current | 510-560-580% |
| Cos phi - efficiency | 0.85-0.82-0.79 |
| Speed | 2860-2880- 2890 rpm |
| Startup method | direct-on-lining |
| Protection class (EC 34-5) | IP68 |
| Insulation class (EC 85) | F |
| Engine protection | NO |
| Thermal protection | external |
| Built-in temp. transmitter | Yes |
| Engine no | 78195517 |
| Others | |
| Minimum efficiency index ,MEI ≥ | - |
| Net weight | 100 kg |
| Gross weight | 126 kg |
| Delivery volume | 0.2 m³ |
Performance curves
