Deep well pump Grundfos SP215-1, 18.5kW 215m³/h, 23m 3x400V 50Hz
- Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally.
- All steel components are made of stainless steel, EN 1.4301 (AISI 304), which ensures good corrosion resistance.
- This pump is approved for drinking water.
- Pump is equipped with an 18.5 kW MS6000 motor with sand protection, mechanical shaft seal, water lubricated shaft bearings and a volume compensating diaphragm.
- The motor is a closed-type submersible motor with good mechanical stability and high efficiency.
- Suitable for temperatures up to 40°C.
- The motor is equipped with a Grundfos Tempcon temperature sensor which, through communication via the power cable together with a control panel MP204, enables monitoring of the temperature.
- The motor is intended for direct start (DOL).
Additional product
information The pump is suitable for applications similar to the following:
- Raw water supply
- Irrigation
- Groundwater lowering
- Pressure increase
- Fountain applications
*-The image of the product may differ from the actual product.
Liquid |
Pump Liquid |
Water |
Max. liquid temperature |
40°C |
Max liquid t at 0.15 m/s |
40°C |
Liquid temp |
20°C |
Density |
998.2 kg/m³ |
Technical data |
Speed |
2900 rpm
|
Resulting flow |
215 m³ /h |
Resulting lift height for the pump |
23 m |
Reduce. impeller |
No |
Shaft seal for engine |
CER/CARNBR |
Read on the nameplate |
CE, GOST2 |
Curve tolerance |
ISO9906:2012 3B |
Pump type |
SP 215 |
Step |
1 |
Model |
C |
Valve |
Yes |
Engine version |
T40 |
Material |
Pump |
Stainless steel EN 1.4301 AISI 304 |
Impeller |
Stainless steel EN 1.4301 AISI 304 |
Engine |
Stainless steel DIN W.-No. 1.4301 AISI 304 |
Installation |
Print page |
RP6 |
Engine diameter |
6" |
Electrical data |
Engine type |
MS6000 |
Application. engine |
Grundfos |
Power consumption - P2 |
18.5 kW |
Power requirement (P2) for pump |
18.5 kW |
Mains frequency |
50 Hz |
Rated voltage |
3 x 380-400-415 V
|
Nominal current |
42.0-41.0- 41.5 A
|
Starting current |
510-560-580% |
Cos phi - efficiency |
0.85-0.82-0.79 |
Speed |
2860-2880- 2890 rpm |
Startup method |
direct-on-lining |
Protection class (EC 34-5) |
IP68 |
Insulation class (EC 85) |
F |
Engine protection |
NO |
Thermal protection |
external |
Built-in temp. transmitter |
Yes |
Engine no |
78195517 |
Others |
Minimum efficiency index ,MEI ≥ |
- |
Net weight |
100 kg |
Gross weight |
126 kg |
Delivery volume |
0.2 m³ |
Performance curves
» Drawing with measurement description